Before calling a professional furnace service in Los Alamitos California, you couldtry the following troubleshooting tips to try to solve your furnace issue.
Furnace service in Los Alamitos California is essential if you have afurnace in your home. A furnace provides survival and comfort in cold winterweather. We would still be huddling around firewood fires to keep ourselves warm without a furnace.
Unfortunately,furnaces should be well maintained to function efficiently and strongly.
Evenwith proper maintenance, furnaces can still break down and develop issues thatimpede regular functioning. If you realize that your furnace is refusing to turn on or acting up, you should go through the following furnace troubleshooting tips before calling a professional to fix it.
Checkthe filter
Youshould start with the air filter if your furnace is not functioning well. Overtime, the filters will get dirty. Dust and dirt can quickly clog the filter of your furnace and this impedes airflow. It also worsens the quality of indoor air. Dirty filters can also prevent furnaces from turning on. It can also cause premature breakdowns and even cause a fire hazard.
Youshould turn the thermostat off and flip your furnace switch off beforeconducting any troubleshooting work on your furnace. You should ensure you check your filters after every thirty days. Make sure you hold your filter up to a source of light and if light cannot pass through the filter, then it should be thoroughly cleaned or replaced. Remember that the arrows are supposed to point in the airflow direction when installing your new filter. You should also ensure you secure the access panel.
Inspectthe thermostat
Beforeyou call a furnace service near you, youshould inspect the thermostat. Make sure the thermostat is set to “heat” andthen try setting the temperatures at least five degrees higher than the room temperature. Replace the batteries if the batteries need replacement. For electromechanical thermostats, you should open them up and dust them. Use a soft paintbrush to lightly brush off dust and dirt, including around the contact plates and metal coils. If you are using a brush that is too large then you should try soft paper.
Inspectthe location of your thermostat and ensure it is not receiving any falsereadings from lamps, sunlight, space heaters, ovens or other sources of heat. If the thermostat is getting the wrong input, it will send the wrong output.
Inspectthe switch and electrical panel
Ifthe filter and the thermostat are fine then power could be the issue. Youshould check the switch near the furnace to see if someone accidentally turned it off. You should flip it back on if it is off. If that does not work then go to the electrical panel and ensure it is turned on at the fuse box or breaker box.
Checkif the breaker box is labeled and ensure the breaker is on. If it doesn’t haveany labels, you should look for the switch of the breaker that is opposite the rest. This is the breaker to switch on with the rest. Reset the breaker by switching it off and then on again. If this doesn’t work then you will need to call a furnace service Los Alamitos California company.
